[Elecraft] accurate time

[Bill Johnson]

My effort is just to use notepad and paste into the Command line on occasion
to sync the clock.  However, this didn't seem to work based on what you sent
out.  I was just playing and am in no hurry.  One does learn, however,
through the tinkering process. :-)


Bill


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Dick Dievendorff
Sent: Monday, March 09, 2009 3:49 PM
To: 'Terry'
Cc: Elecraft at mailman.qth.net
Subject: Re: [Elecraft] accurate time

They exist. This capability is being considered for eventual inclusion in
the K3 Utility.  But I have other K3 Utility tasks ahead of this one...

If you're impatient, you might be able to work up something based on the
commands described...

73 de Dick, k6KR


-----Original Message-----
From: Terry [mailto:terry at kk6t.com] 
Sent: Monday, March 09, 2009 1:43 PM
To: Dick Dievendorff
Cc: Elecraft at mailman.qth.net
Subject: Re: [Elecraft] accurate time

So we just need a little utility that will automate this process and 
keep the K3 "on time".

73 de Terry KK6T

Dick Dievendorff wrote:
> Yes, it can.
>
> The K3 commands involved are K31; MN073; DS; SWT11; UP; or DN; SWT12; UP;
or
> DN; SWT13; UP; or DN; and MN255;
>
> Recent versions of Windows (certainly XP and beyond) include an NTP client
> that can synchronize with one of several NTP servers.  You right click the
> time in the status bar, choose "Adjust Date/Time", select the "Internet
> Time" tab, optionally provide an alternate NTP server and punch the
"update
> now" button.  No special NTP client code is required to get to the
accuracy
> necessary for this sort of task.
>
> Dick, K6KR
>
>
> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Terry
> Sent: Monday, March 09, 2009 11:37 AM
> To: Elecraft at mailman.qth.net
> Subject: Re: [Elecraft] accurate time
>
> Can the RTC be set via a software command?  The software could check an 
> internet time server and update the K3 as necessary.
>
> 73 de Terry KK6T
>
> SM6TUW wrote:
>   
>>> While on the subject of time, where is the oscillator that is used by
>>> the built-in clock on the K3?
>>>     
>>>       
>> Front panel board.
>>
>>   
>>     
>>> Is it adjustable?
>>>     
>>>       
>> No. Sorry...
>>
>> 73,
>> Lyle KK7P
>>
>> I consulted the data sheet for the clock circuit PCF8563T (U16 in the K3
>> circuit diagram ) You can adjust the average deviation over one year less
>> than +- 5 minutes. Adjustment of one capacitior (C60) is required though.
>> http://www.nxp.com/acrobat_download/datasheets/PCF8563_6.pdf
>>
>> I feel that i have less accuracy  on my K3 than my quarz clocks in the
>> schack so i will try this approach.
>> Lyle - when will we get a service manual (with PCB layout ) for
>> this wonderful station?
>>
>> 73
>> Jan SM6TUW
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>>
>>   
>>     
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
>
>   

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html