[Elecraft] [K2] K2 K2ATOBKT "Low Battery"

[Don Wilhelm]

Damon,

Well, I haven't heard that problem in a long time, but the solution is easy.
On the top of the Control Board, just to the right of center is a switch 
to change the voltage display from external to internal - you must have 
bumped it in the upgrade process - set it to the INT position and all 
will be well.

73,
Don W3FPR

W4HDM wrote:
> HI,
>
> OK I am just finishing up the A to B mod and somewhere at the end between
> Misc control board changes and sidetone Modification or possibly after the
> XFILMDKT I am getting "Low Battery" warning and "000" reading for voltage
> when tapping Display. This is with power coming from a power supply and not
> the internal battery. 
>
> I did miss a pin count on the sidetone mod and fixed that. (used pin 7
> rather than 6) and for the 82-mH inductor, I missed a pin by one as well
> (using pin 8 and 10 rather than the proper 7 and 10) and this has been
> fixed. 
>
> And it was all going so well!
>
> Thanks in advance!
>
> -----
> W4HDM-DAMON-K2#473 
>   
>