[Elecraft] K3 Transmit thru Line-In

[Eric Scace K3NA]

Did you set the Line In gain control to a value >0?

on 09 Mar 05 10:43 Bud Governale, W3LL said the following:
> I can't get any transmit audio via the Line-In connector.
>
> Connecting the Mic cable to the rear panel MIC connection produces good transmit power and audio.
>
> I know audio is coming from the sound card output because it also drives the computer speaker via its line in 
> connection.
>
> I tried moving the Mic connector from the rear panel MIC to the Line-In rear panel position. This still would not 
> produce K3 SSB output.
>
> Moving the Line-In connector to the MIC rear panel connector produces good transmit power and audio.
>
> The TX lights each time but no output via Line-In
> The K3 is in LSB mode.
> TX TEST is in normal.
> MIC SEL is RPH
> MIC + LIN is ON.
> MIC Gain is 30
> Comp is 22.
>
> Why can't I transmit thru the Line-In connection?
>
> 73,
>
> Bud W3LL
> w3ll at arrl.net
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>