[Elecraft] K3 + LP Pan + Microkeyer II

[Robert Naumann]

Yes - to be specific - there are no *physical* connections between the two
and no changes should be made to your MicroKeyer configuration - it stays
as-is.

LP Bridge will be configured to "talk to" the virtual com port set up for
the K3 in your MicroKeyer router configuration and LP Bridge will then
provide a different # virtual com port to "talk to" your applications.

Changes will need to be made in your applications that control the K3 to
point to the new Virtual port rather than the one provided by MicroKeyer.

Aside from LP Bridge using the K3 virtual port, having a MicroKeyer is
essentially coincidental rather than an integral part of the LP-PAN setup.

Once I had the LP-Pan unit built and the proper cables to connect the sound
card, set up only took a few minutes. The LP-Pan manual is fairly
comprehensive in covering all of this.

73,

Bob W5OV

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Joe Subich, W4TV
Sent: Wednesday, March 04, 2009 9:18 PM
To: 'Robert Naumann'; knowkode at sbcglobal.net; elecraft at mailman.qth.net
Subject: Re: [Elecraft] K3 + LP Pan + Microkeyer II


> Your LP Pan system should not be connected to, or interact 
> with your MicroKeyer whatsoever. 

There is one correction ... the LP-Bridge software should 
connect to the K3 through the CAT virtual port in microHAM 
Router and all applications (including PowerSDR or HRD) that 
access the K# CAT interface should connect to ports provided 
by LP-Bridge.  

73, 

   ... Joe, W4TV 
 


> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net 
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Robert Naumann
> Sent: Wednesday, March 04, 2009 9:53 PM
> To: knowkode at sbcglobal.net; elecraft at mailman.qth.net
> Subject: Re: [Elecraft] K3 + LP Pan + Microkeyer II
> 
> 
> Jim,
> 
> Your LP Pan system should not be connected to, or interact 
> with your MicroKeyer whatsoever. You will need a sound card 
> (or external USB sound unit like the EMU 0202) dedicated to 
> LP-Pan duty.
> 
> Follow the instructions and you'll be up and running quickly.
> 
> 73,
> 
> Bob W5OV
> 
> 
> 
> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net 
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Jim Hoge
> Sent: Wednesday, March 04, 2009 3:30 PM
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] K3 + LP Pan + Microkeyer II
> 
> Greetings,
>  
> Are there any issues I need to be aware of for the setup of 
> my K3 with an LP Pan and a Microkeyer II? I don't claim to be 
> a computer wiz by any stretch but would like to add an LP Pan 
> and a Microkeyer to my K3 setup. My only experience has been 
> in interfacing a Mk-V and a Rigblaster, certainly yesterday's 
> technology. Advice and opinions are appreciated. BTW, my 
> computer is a Core 2 running XP, 4 gig of ram, a good but I 
> forgot who video card, and currently only the onboard soundcard.
>  
> tnx,
> Jim W5QM 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html