[Elecraft] K3 birdies - question?

[Ian White GM3SEK]

Ron D'Eau Claire wrote:
>I've had the cables all over the place. There seems to be only one 
>cable whose placement has a significant effect on birdies. That's the 
>long (10"/25cm)cable running from J84 at the bottom of the Auxiliary 
>KSYN3 board to J85 on the KRX3 RF module. It should be dressed as shown 
>in Figure 47 in the KRX3 manual. In some cases it helps to keep it away 
>from the tiny toriods on the mixer board as well. Either run it across 
>above the mixer board as shown or work it down under the mixer board so 
>it loops up between the mixer board and the front panel shield to J85 
>on the KRX3 RF module.
>

Thanks, Ron.


-- 

73 from Ian GM3SEK