[Elecraft] PAR endz-fed

[Randy Cook]

I am using the 40m EndzFed at my QTH.  It slopes from 10 ft outside my  
shack to 40 ft up into a redwood tree. I do not have a lot  
configuration for a decent 40M dipole.  Although not recommended by  
PAR, I have worked stations on 60 and 80 meters with it using the K3  
autotuner.

I cannot compare the performance to other wires, however, the unit is  
well made and has survived two winters and summers fine. It worked  
well with my previous Yaesu rig, and seems to be fine with my new K3.   
No rare DX, but I can usually work 'em if I can hear them.  Support is  
very good, questions answered quickly.


Date: Sun, 1 Mar 2009 23:49:12 -0500
From: "Chuck Pridgen" <cpridgen at embarqmail.com>
Subject: [Elecraft] K1 ANTENNA
To: <Elecraft at mailman.qth.net>
Message-ID: <C32DC7C04B1A43879C15DC5CA56267AC at LENOVO03E76884>
Content-Type: text/plain;	charset="iso-8859-1"

HOW MANY OF YOU ARE USING PAR ELECTRONICS END FEDS WITH YOU K1 OR  
OTHER ELECRAFTS.

I WOULD LIKE INPUT ON HOW THEY HAVE WORKED FOR YOU, AND HOW YOU HAVE  
MOUNTED THEM.

I AM INTERESTED IN USING THEM AT THE BEACH THIS SUMMER.

THANKS, CHUCK N4UED



Randy Cook
k6crc at arrl.net