[Elecraft] [K3] KDVR3 enable

[John]

To all who responded, thank you. It was a firmware issue and loading 
the latest FW did the trick. I looked in the manual after the install 
and assumed it would work with older FW. I do remember reading 
something about the DVR and FW some time ago on the list, but it 
slipped my mind. That seems to be happening more often as I grow older.

Great list, thanks!
John
k7up

At 05:32 PM 28/02/09, you wrote:
>Thanks for the quick reply from WA7U and M1PAF...I'll give it a try
>later and let you know the results.
>
>Thanks again,
>John
>
>At 05:11 PM 28/02/09, you wrote:
> >I finally installed my KDVR3 today, it's been here for a month or so.
> >Things went well during the installation. Used an anti static mat and
> >wrist strap.
> >
> >Powered up, radio played normal. Went into config menu to set the
> >KDVR3 to nor. All I get is the dreaded "not inst" msg. Cycled the
> >power per instructions hoping the K3 would recognize the DVR, no luck.
> >
> >Is there a certain level of software I need to install? I'm running
> >ver.2.38/1.90.
> >
> >K3 #501, fourth problem......hope it can be resolved. I've already
> >sent it back to Aptos twice to spend a little vacation time with it's
> >old friends.
> >
> >Any ideas, other than to take it apart and do'er again?
> >
> >John
> >k7up
> >K3, (2)K2's, K1
> >
> >______________________________________________________________
> >Elecraft mailing list
> >Home: http://mailman.qth.net/mailman/listinfo/elecraft
> >Help: http://mailman.qth.net/mmfaq.htm
> >Post: mailto:Elecraft at mailman.qth.net
> >
> >This list hosted by: http://www.qsl.net
> >Please help support this email list: http://www.qsl.net/donate.html
>
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html