[Elecraft] K3 VFO tuning hash

[Ian White GM3SEK]

James Sarte wrote:
>I had a similar issue, except my encoder noise was most noticeable 
>around 5MHz.  After testing and discussions with Wayne, it appears to 
>be due to "hot synthesizers."
>
>I do not notice this problem in the 6m band.
>

I notice it sometimes while tuning the bottom 50kHz of 6m for beacons. 
The sound is like sawing wood, but is only present while actually 
rotating the VFO knob.

It also seems to depend on other settings of the rig because sometimes 
it isn't audible at all while tuning, or is much weaker.


-- 

73 from Ian GM3SEK