[Elecraft] K3 QSK

N2TK tony.kaz at verizon.net
Thu Jun 25 16:05:54 EDT 2009


No, the AGC has no effect one way or the other.

So far it seems reducing the audio level below about 9 o'clock or reducing
the RF gain below about 1 o'clock or increasing MON above about 35
significantly reduces the thumping on both K3's here.  

As I said earlier it is not a major issue, but would be nice to eliminate.
The three conditions found so far to eliminate the thumping are not
practical from an operating point of view.

Maybe I don't have something set up properly?

73,
N2TK, Tony

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Joe Planisky
Sent: Thursday, June 25, 2009 3:29 PM
To: Toby Pennington
Cc: Elecraft at mailman.qth.net
Subject: Re: [Elecraft] K3 QSK

Does turning off AGC have any effect on the thumping?

73
--
Joe KB8AP

On Jun 25, 2009, at 10:27 AM, Toby Pennington wrote:

> NO,  this is not what is going on.   If the sidetone monitor is  
> turned up to a good fairly loud position,  you will not hear the  
> thumping.  IF it is turned to what I would call a comfortable level  
> for my ears,  then the thumping occurs.
>
> It is not dependent on AF gain being set excessively high,  but is  
> rather dependent on the monitor setting is relation to the AF gain.
>
> Toby  W4CAK
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html



More information about the Elecraft mailing list