[Elecraft] 2-56 pan heads

[Ron D'Eau Claire]

It's my understanding the screws are in *separate* envelopes in with the
other hardware, which I why I wrote the note that way. 

Thanks, Joe. I'll check with the people pulling the parts for the kits. 

Ron AC7AC

-----Original Message-----
From: Joe Subich, W4TV [mailto:lists at subich.com] 
Sent: Wednesday, June 24, 2009 8:54 AM
To: 'Ron D'Eau Claire'; 'Robert 'RC' Conley'; elecraft at mailman.qth.net
Subject: RE: [Elecraft] 2-56 pan heads


If I recall correctly the "missing" 2-56 pan head screws 
(used in the front panel board assembly - pg 24) are packed 
with 2-56 screws that are used for the VFO A trim panel 
(page 31). 

Unfortunately, if the user sets aside the separate envelope 
with trim panel hardware until it is time to install the 
trip panel (to prevent loss of the 2-56 hardware), he will 
not find the "missing" 2-56 hardware when needed to attach 
the spacers to the front panel circuit board. 

I had that problem with my K3 .... and this is the fourth 
or fifth report of the same problem here.  The assembly 
manual needs an explicit statement on page 24 indicating 
where to find those screws.  

73, 

   ... Joe, W4TV