[Elecraft] 2-56 pan heads

[Robert 'RC' Conley]

During the assembly of K3 #3212 Front panel on page #29 requires 2ea
2-56 black 1/4 6.4mm pan head screws and #2 split lock washers to
mount the stand-offs under the LCD. These screws were missing from the
Hardware bag. There were 2ea 4-40 black flat head screws in the bag. I
found 2ea 2-56 black pan head screws in my Junk Box, however they were
shorter than 5.6mm. In order to install the stand-offs the #2 split
lock washer had to be left off. Is this action going to cause an issue
later?
RC kc5wa

-- 
72 de RC KC5WA
<http://www.kc5wa.net>