[Elecraft] K3 QSK?

[Don Rasmussen]

Think I have it, had set TX DLY to 20, it is normally 8. Somehow I considered this would only apply to VOX mode. ???

Set it back to 8 and QSK is good again.

Thanks for the reports... 

--- On Tue, 6/23/09, Steve Ellington <n4lq at carolina.rr.com> wrote:

> From: Steve Ellington <n4lq at carolina.rr.com>
> Subject: Re: [Elecraft] K3 QSK?
> To: "Don Rasmussen" <wb8yqj at yahoo.com>, elecraft at mailman.qth.net
> Date: Tuesday, June 23, 2009, 5:59 PM
> You certainly have something wrong.
> At 20 wpm in QSK mode, I can not only hear between dits but
> can almost understand what an AM station is saying! At 50
> wpm I can hear the distinct clicks as a carrier from a BC
> station pops through.
> Steve Ellington
> N4LQ at carolina.rr.com
> ----- Original Message ----- From: "Don Rasmussen" <wb8yqj at yahoo.com>
> To: <elecraft at mailman.qth.net>
> Sent: Tuesday, June 23, 2009 8:09 PM
> Subject: [Elecraft] K3 QSK?
> 
> 
> > 
> > Sending a string of DITS using an external keyer, and
> in QSK mode, I can hear receiver noise between the dits
> until about 19 WPM.
> > 
> > At that point the receiver is muted, so 20wpm or
> greater on my radio as it sits, there is no QSK. :-(
> > 
> > Is there a firmware adjustment that will improve
> this?
> > 
> > TIA,
> > Don
> > 
> >
> ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> > 
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html 
> 
>