[Elecraft] K3 headphones

[Joe Subich, W4TV]

Low impedance headsets are the ones with decreased low end 
response - or apparent excessive high frequency response and 
the resulting "tiring" sound.

I strongly recommend 200 Ohm (Heil ProSet) or 600 Ohm 
(professional) headsets. 

73, 

   ... Joe, W4TV 
 



> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net 
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Brett Howard
> Sent: Monday, June 22, 2009 11:47 AM
> To: Roy Morris
> Cc: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] K3 headphones
> 
> 
> Was it high or low impedance that was causing issues?  I'm 
> contemplating plugging in two pairs of headphones which is 
> probably going to put me somewhere around 11 to 15 ohms 
> nominal.  I'm sure it'll do fine but hadn't been able to find 
> much in the way of specs for the K3 in this regard.
> 
> 
> On Mon, 2009-06-22 at 11:30 -0400, Roy Morris wrote:
> > Gary,
> > I use a 33 ohm headset  with my K3.  I have not noticed any 
> reduction of audio and the impedence match seems to be good.  
> I use an AKG K240 Studio headset and get excellent 
> reproduction.  Roy Morris  W4WFB
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> > 
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html