[Elecraft] K3 use with MicroKeyer II

[Doug Turnbull]

Joe, 
     Thank you kindly.  I have downloaded the manual and find it a complex
procedure but perhaps all will fall into place.   The other sources of
information I was unaware of and I am very grateful for your referring me to
them.   You have done at least one good turn this day.   
     73 Doug EI2CN

-----Original Message-----
From: Joe Subich, W4TV [mailto:lists at subich.com] 
Sent: 19 June 2009 03:43
To: 'Doug Turnbull'; Elecraft at mailman.qth.net
Subject: RE: [Elecraft] K3 use with MicroKeyer II



> Can anyone please direct me to material describing how to use a 
> K3 and microHam MicroKeyer II together.  

The microHAM microKEYER II manual gives information on setting up 
and configuring the hardware.  There are setup guides for Win-Test 
and the N3FJP software (AC Log) available from the files area of 
the microHAM group on Yahoo (http://grous.yahoo.com/group/microham) 
or located on the CD shipped with all microHAM interfaces. 

You can download the microHAM manual in advance of receiving your 
hardware from the web at: 
    http://www.microham.com/Downloads/MK2_English_Manual.pdf

73, 

   ... Joe, W4TV 
 



> 
> Can anyone please direct me to material describing how to use a K3 and
> microHam MicroKeyer II together.   The MK2 is ordered with 
> cable for the K3
> but not yet delivered.  I plan to purchase the second RX for 
> the K3 this
> summer but for the moment I am using a single RX.   The software for
> contesting is going to be WIN-TEST or N3FJP depending on the 
> contest and how
> the packages work with the MK2.    Many thanks for any 
> direction you can
> give me.   For the moment I am not using digital modes but 
> this will come.
> 
>  
> 
>                        73 Doug EI2CN
> 
>  
>