[Elecraft] TX EQ setting

[Peter Connors]

I think the logger EQ macros are probably most useful where a station is 
switching modes often and needs to tailor the response appropriately.
Logger32 has up to 36 macros available so there is plenty of room for 
them in there. N1MM appears to have less space and as you rightly point 
out, disrupting the more useful N1MM macros is undesirable. In a serious 
contest situation the EQ would be set up before the start to avoid this 
problem.
Running an independent macro program through the COM port can be 
problematical if the logger is also using that port; K3_EZ or the 
Elecraft Utility cannot be used with a logger through LP-Bridge or there 
would be no problem.
Yes, I can unload the logger, load up a macro program, run the macro, 
reload the Logger, get my spots back in place and find where I was but 
it is not elegant :-)

73 Pete

w8zn at comcast.net wrote:
> 
> There are macro programs that can run outside these applications can can 
> take any key sequence and make these changes. The important thing is to 
> not use a key sequence that your logging program is using.
> 
> Terry
>