[Elecraft] R91 on mainboard

[Brett Howard]

Guess it was a non issue... R91 was already 22ohms on my board so the
answer to this question is YES you can have that resistor at 22 ohms
sans sub receiver. 

On Sun, 2009-06-14 at 14:02 -0700, Brett Howard wrote:
> Ok so I'm being a bit lazy and didn't want to dig and find what R91 does
> but being that the KRX3 manual eludes to the fact that that R may
> already be 22 ohms makes me think that I can replace it with 22ohms
> while I'm in installing the new digital board for the band data pull up
> R's and doing the short circuit protect for the speaker jack.  
> 
> I'm probably going to be buying the KRX3 so cutting the two traces near
> R91 (which is in the manual for the new digital board) will also help
> make the KRX3 go in easier...
> 
> Any other tips I'm all ears.  Sorry for not doing a bunch of searching
> but I'm about to head into the office and go do this work...
> 
> Thanks much.
>