[Elecraft] kat1

[Don Wilhelm]

Ed,

That capacitor must be 100 pf.  I am not certain about the extra .001 
uF, an extra does get packaged once in a while.
Look for the 100 pF (the current ones have short leads) sticking to 
something in the kit (if there is any tape, look there first).  If it 
does not readily show itself, send a brief explanatory note to 
parts at elecraft.com and a replacement capacitor should be on its way to 
you soon.

73,
Don W3FPR

E Neubauer wrote:
> I constructed the kat1 for my k1.  I noticed that they did not include a 100 pf capacitor for C10, but gave me an extra .001 microFarad capacitor.  Don't know if this was a packing mistake or a substitution of different value.  Any ideas?  Thanks.
>
>  
>
> Ed - KB3SZZ
>   
>