[Elecraft] K3-Signalink USB connection question

[R. Kevin Stover]

Rick,

Lyle had it right.
To take advantage of the Signalink's onboard sound card connect the K3 
line out to the Signalink AUX port. The Signalink will send the audio 
data back to whichever program you're using via it's USB or RS-232 
connection.

I was using a Signalink USB with my K2 because the old, and I mean old 
sound card in my old computer was very noisy. New computer, new  
M-Audio  2496 sound card, and I've retired the Signalink.

Rick Braun wrote:
> There must be a simple answer to this question, I am having a brain fade. The SignaLink for the K3 comes with an 8 pin mic connector for front panel connection between the radio and the SignaLink.  However, there is no receive audio at the front panel mic connector, right?  Thus, no waterfall.   If so, how do you get receive audio from the radio to the SignaLink?  Thanks for any help.
>
> Rick Braun
> K3 #2869
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com 
> Version: 8.5.339 / Virus Database: 270.12.68/2175 - Release Date: 06/14/09 05:53:00
>
>   


-- 
R. Kevin Stover
ACØH