[Elecraft] Transmitting CW While in SSB

[Bill W5WVO]

Go to CW WGHT in the Config menu. Press the "A/B(1)" key to toggle between SSB 
+CW and SSB -CW.

Bill W5WVO


Radio Amateur N5GE wrote:
> I've been doing the above with my first K3 #806 for a long time,
> especially on 6m.  Today I was monitoring 2m USB on the other rig,
> #1055, and heard a station calling CQ.  I quickly attached a paddle to
> the rig and started answering the station, but no CW was transmitted
> from the rig (still in USB).
>
> I have searched the latest K3 manual using CW for the search criteria
> and haven't found a way to turn the XMIT CW in SSB setting on.
>
> What am I overlooking?
>
> The firmware in the #1055 is 3.14.  The same as in #806.
>
> Thanks,
>
> Tom, N5GE
> K3 #806, K3 #1055
> XV144, XV432, KRC2
> W1 and other small kits.
> http://www.n5ge.com
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html