[Elecraft] K3: machined concentric knobs from Mouser

[k4tmc at aol.com]

Yes, the extended side panels are a good alternative to some type of 
front cover.  I have them for my K3 and K2. Mine were made by David 
Saylor (forgot the call) at www.saylorsmachine.com (select the link for 
capabilities).  They are 1/4 inch thick, so will add some weight to the 
K3.

Hey...maybe Rose could make something that would slip over the front 
with a velco strap or elastic band for tightening.

73,
Henry - K4TMC
K3/100 #98 and K2/100 #3137




-----Original Message-----
From: Doug Faunt N6TQS +1-510-655-8604 <faunt at panix.com>
To: brett at livecomputers.com
Cc: Elecraft at mailman.qth.net
Sent: Thu, Jul 30, 2009 1:49 pm
Subject: Re: [Elecraft] K3: machined concentric knobs from Mouser

My plan was to use bits of Velcro to hold it on.
Extended side panels would give more protection and a good way to hold
them on, too.

My K2's have extended side panels, thanks to someone on this list.

73, doug

   From: "Brett Howard" <brett at livecomputers.com>
   Date: Thu, 30 Jul 2009 10:30:25 -0700

    Admittedly I'd pay 30 to 35 bucks for a snap on front cover much 
like the
    newer Agilent oscilloscopes do today.  I'm not sure it would be all 
that
    possible to snap on being that there are no snap features built into 
the rig
   itself at the moment.

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html