[Elecraft] Curious problem after installing KPA3 and KAT3

[Doug Person]

I removed the KAT3 and reinstalled the KANT3.  SWR now normal.

Doug -- K0DXV
>
>
>
> At 22:59 07/27/2009, you wrote:
>> Hi Folks,
>>
>> Installing the KPA3 and KAT3 is pretty straight forward.  That's why I
>> don't understand what's wrong.  Looks like ANT1 and ANT2 are both open.
>> I can see the leads physically connected in the right order to the
>> KAT3.  The KAT3 is enabled in the menu, as is the KPA3.  But when I
>> tried to run the calibration program, it says the SWR is too high.  When
>> I attempt to transmit with just 5 watts, the internal SWR meter
>> indicates very high SWR.
>>
>> I admit that I am recovering from major surgery (with the usual
>> assortment of drugs) and my brain may not be fully functional yet, but I
>> can't see what I may have done wrong...
>>
>> Any thoughts?
>>
>> Thanks,
>>
>> Doug -- K0DXV
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>
>