[Elecraft] [K3] dBV display

[Julian, G4ILO]

Lyle Johnson wrote:
> 
> Hello Julian!
> 
>> I don't use the dBV display very often...
> 
> First, you need to select AFV. Once that is stable, go to dBV and you 
> will then read dB relative to the AFV level.  If you go directly to dBV, 
> it is referenced to 0 so you get an over range.
> 
> 

Crikey, you're quick off the mark tonight Lyle! I must have been going to
AFV accidentally, which was getting it going. The problem must occur when it
is left in the dBV setting from the previous time the radio was used. I
didn't know you had to do that. It always seemed to just work before. Thanks
for the info!

-----
Julian, G4ILO. K2 #392  K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http://www.g4ilo.com/ktune.html

-- 
View this message in context: http://n2.nabble.com/-K3--dBV-display-tp3326877p3326907.html
Sent from the [K3] mailing list archive at Nabble.com.