[Elecraft] [K2] KBT2 Battery

[Don Wilhelm]

Paul,

That should be fine.  The K2 itself is speced for up to 15 volts input.
If you want a refinement over the K2 display of voltage, measure the 
voltage right at the terminals of a fully charged internal battery.

If your battery was not fully charged when you cranked up the power 
supply, check the voltage over the next several days and re-adjust the 
power supply as needed.

73,
Don W3FPR

pkhjr wrote:
> I installed the battery in my K2 and adjusted the voltage up on my astron. 
> The voltage on the astron is 14.4 and the voltage on K2 meter is 13.8.  Is
> this to high or should I drop it down a little?
> Tnx Paul
>   
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com 
> Version: 8.5.375 / Virus Database: 270.13.21/2252 - Release Date: 07/21/09 05:58:00
>
>