[Elecraft] Question on KRX3 Installation

[Grant Youngman]

Good question.  The only place I've seen this was in the errata  
mentioned.

The note in the errata indicates that cutting the traces  " ...  
ensures that the digital-to-analog converters  ... always receive the  
proper signal levels"

Grant/NQ5T


On Jul 17, 2009, at 8:57 AM, Paul Ferguson wrote:

>> In errata C-7 dated March 15, 2009, page 1, there are instructions to
>> cut two traces in the area to the right of D40 on the RF board.
>
> Shouldn't the above change be a mod mentioned on the "K3  
> Enhancements and
> Application Notes" info maintained on the Elecraft Website?
>
> I installed the KRX3 before the errata was issued. I used the mods  
> page to
> update my K3, but missed the change because it is not on the mods  
> page.
>
> Paul
> K5ESW
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html