[Elecraft] Possible doublet configuration

[Glen Torr]

Hello All,

Following this thread with much interest. I need a stealth antena and
a doublet may do the job.
Could I feed my K3/100 with ATU into a BL2 right at the antenna
connector, the output of the BL2
to home made ladder line, (2 to 4 inch spacing) to a doublet approx
1/2 wavelength on the lowest
freq?

Is it OK to bring ladder line into the shack?

The 1:1 or 4:1 of the BL2 might provide matching options in difficult cases.

Thanks for any thoughts,

Glen VK1FB