[Elecraft] Drilling an el-cheapo finger dimple into the K2 tunning knob

[dw]

I used a wood countersink with a rounded drill tip.
Went down about 2/8 inch.
I found that a metal strip is just below the plastic surface of the
knob.
I went through this.
I made sure it was smooth, but it would have been better if I'd had a
machine shop do this.

Of course it doesn't look professional.
But it works smooth and is a functional improvement on the cheap.

Duane
N1BBR
-- 
 Bw_dw at fastmail.net