[Elecraft] KEYOUT PTT only when transverter band selected

[Julian Moss]

On 12/07/2009, Don Wilhelm <w3fpr at embarqmail.com> wrote:
> Julian,
>
> Does your transverter have an "enable" input signal - hopefully 5 volts
> active and 0 volts inactive?  If so, you can connect it to the K3  AUX
> I/O pin 7 (XVTR ON) and set the menu CONFIG: XVn ON.
> Of course, this AUX I/O pin is shared with TX INH, so if you are using
> the TX INH function, that will not work.
> BUT, you can always decode the band data outputs for the transverter
> band you are using and use that for a transverter enable (or gate the
> PTT input to the transverter with the band data decoded).
>

It doesn't appear to. I think that's something unique to the Elecraft
range of transverters, unfortunately.
-- 
Julian, G4ILO
G4ILO's Shack: www.g4ilo.com
G4ILO's Blog: www.g4ilo.com/blog.html