[Elecraft] K3 to VL-1000 AMP

[Joe Subich, W4TV]

The band switching interface of the FL-7000 is the same as 
that of the newer Yaesu Quadra.  N0SS has interface info 
for the Quadra on his K3 web site: www.n0ss.net/index_k3.html
This link: www.n4ats.com/?download=D4000019_Schematic.pdf
shows the conversion from the Quadra "Band Data" jack to 
the FL-7000 "Band Data" jack.  Molex connector body and 
pin part numbers are available on the N4ATS web site to 
build your own cable. 

73, 

   ... Joe, W4TV 
 


> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net 
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Kjeld Holm
> Sent: Thursday, July 09, 2009 12:30 PM
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] K3 to VL-1000 AMP
> 
> 
> Dear K3 gurus
> 
> I am considering buying an FL-7000 for my Elecraft K3 (serial 
> number 2891). But now I am afraid that I will not be able to 
> use band data for my K3 to control the FL-7000. Could you 
> please tell me if it is possible or not? And if possible 
> please tell me how.
> 
> Vy 73
> OZ1CCM Kjeld
>