[Elecraft] [K3] Power variations in K3 / 3.19

[ab2tc]

I have this problem also, not only after power up, but after each band
change. My favorite workaround is to change mode to data FSK, switch to
dummy load, then press PTT  for a couple of seconds. Back to SSB and I have
full talk power immediately. 

Can't comment on your other problem as I am still on 3.14.

Knut - AB2TC

Ignacy wrote:
> 
> <snip>
> 
> There is an old problem still present on 3.19. AFter turning the rig on,
> in SSB the peak power starts at 30-70W and in a minute of transmitting
> rises to about 95W (when set to 110W). Measurements with LP-100 calibrated
> in factory.  The initial power varies from time to time. 
> 
> Any ideas?
> 
> Ignacy
> 
> 
> 
> 
> 
> 
> 
> 
> 


-----
AB2TC - Knut
-- 
View this message in context: http://n2.nabble.com/Power-variations-in-K3---3.19-tp3231601p3231790.html
Sent from the [K3] mailing list archive at Nabble.com.