[Elecraft] VFO/ split

[Brett Howard]

I should also state another good quick way to just lock VFO B is to hold
1 to activate B SET mode.  Your VFO A display will now say "b SEt".  Now
you can hold the RATE button to activate the LOCK feature.  Because
you're in 'b SEt' mode this LOCK will act upon the VFO B area.  Tap A/B
or hold B SET again to return to normal operation.

~Brett (KC7OTG)


On Wed, 2009-07-08 at 10:58 +0200, vidi wrote:
> Good day Elecraft gang:
> 
> I have just completed my K3/100 and am preparing for the IARU contest this weekend.  I want to know if it is possible to operate 'SPLIT' in such a way that the B VFO freq is locked as XMIT freq and be able to listen around with A VFO without changing the XMIT freq of VFO B.   
> 
> Looking forward to some advice - - - I do not have a sub RX
> 
> 73
> 
> Vidi - ZS1EL
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html