[Elecraft] [K2] External Amp Keying with KX60V Installed

[Don Wilhelm]

David,

You have it right.  I might point out that there is room (just barely) 
for an RCA jack near the key jack.  Take a look at my website 
www.w3fpr.com article on the K2 Fixed Audio Output and you will see the 
location I refer to.  Of course, you could use one of the transverter 
holes in the top cover, but you would need to provide a disconnect 
should you ever want to completely remove the top cover for service.

73,
Don W3FPR

davidvk2nu at virginbroadband.com.au wrote:
> Hi All,
>
> I've just picked up a second hand K2, with KX60V installed. 
>
> I believe I can use this for keying external amps, but just wanted to check
> that I'm on the right track.
>
> Looking at the circuit diagram of the KX60V I'm thinking I would use pins 1
> and 2 on J2. Would I be right with this??
>
> Thanks
>
> David, VK2NU
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com 
> Version: 8.5.375 / Virus Database: 270.13.5/2220 - Release Date: 07/05/09 17:54:00
>
>