[Elecraft] K3 LINE Out mixes KRX3 and main output?

[Joe Subich, W4TV]

> It doubles the data transfer to capture both sound channels 
> and discard one. 

Why would you bother to capture both?  Your software should 
be able to select left, right or mixed input from the soundcard. 
Even relatively basic USB sound codecs provide control over the
input configuration. 

73, 

   ... Joe, W4TV 
 


> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net 
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Leigh 
> L. Klotz, Jr WA5ZNU
> Sent: Saturday, January 31, 2009 1:24 AM
> To: ab7r at cablespeed.com
> Cc: Elecraft Reflector
> Subject: Re: [Elecraft] K3 LINE Out mixes KRX3 and main output?
> 
> 
> Yes, so my request would be to be able to mute one of them. 
> Using a cable to connect only left is the best solution if 
> the rig can't 
> mute one.
> It doubles the data transfer to capture both sound channels 
> and discard one. I agree though it's not that high priority. 
> Leigh/WA5ZNU
> > When the SUB is turned on the Line Out audio is Main=left and 
> > Sub=Right.
> >
> > -------------------------
> > 73,
> > Greg - AB7R
> > Whidbey Island WA
> > NA-065
> >
> >
> > On Fri Jan 30 11:12 , Iain MacDonnell - N6ML  sent:
> >
> >   
> >> Leigh L. Klotz, Jr WA5ZNU wrote:
> >>     
> >>> Is it possible to control whether the sub rx goes to the 
> line out or 
> >>> not? It seems that both main and sub rx are always going to line 
> >>> out; I guess they're on left/right channels? If not, I 
> guess I need 
> >>> to make a cable to cut out one channel so I don't see 
> both with my 
> >>> mono sound card line input.
> >>>       
> >> That doesn't quite make sense. If your line-in is really mono, the 
> >> right channel would not be connected to anything. Are you 
> sure it's 
> >> not the software you're using that's mixing the two 
> channels together 
> >> ?
> >>
> >> Also check your audio recording volume control settings (assuming 
> >> this is on Windoze) - maybe you're recording the "Mono 
> Mix" instead 
> >> of "Line In" ?
> >>
> >>     ~Iain
> >> _______________________________________________
> >> Elecraft mailing list
> >> Post to: Elecraft at mailman.qth.net
> >> You must be a subscriber to post to the list.
> >> Subscriber Info (Addr. Change, sub, unsub etc.):
> >> http://mailman.qth.net/mailman/listinfo/elecraft    
> >>
> >> Help: http://mailman.qth.net/subscribers.htm
> >> Elecraft web page: http://www.elecraft.com
> >>     
> >
> >
> >   
> 
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft    
> 
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com