[Elecraft] K3 LINE Out mixes KRX3 and main output?

[Iain MacDonnell - N6ML]

I think the right place to fix it would be in whatever software is
using the captured audio - the driver is OK, but the software needs to
let you select channels you want.

In lieu of that, an adapter cable makes sense...

     ~Iain



Leigh L. Klotz, Jr WA5ZNU wrote:
> Sorry for the confusion on the sound card side:  It's a stereo input, 
> but I don't get software control of the balance or independent gain.
> It's not on Windows.  The Griffin iMic device specs say stereo, but the 
> driver appears to be supporting only mono gain controls.
> 
> If I go to LIN OUT menu and tapping button 1 to get =PHONES then I can 
> use the audio gain controls to control the mix, but if I use NOR mode 
> LIN OUT then it's always mixed.  Probably easiest for me to make a cable 
> than (a) fix the driver or (b) ask for firmware changes.
> 
> Leigh/WA5ZNU
>> Leigh L. Klotz, Jr WA5ZNU wrote:
>>  
>>> Is it possible to control whether the sub rx goes to the line out or 
>>> not?
>>> It seems that both main and sub rx are always going to line out; I 
>>> guess they're on left/right channels?
>>> If not, I guess I need to make a cable to cut out one channel so I 
>>> don't see both with my mono sound card line input.
>>>     
>>
>> That doesn't quite make sense. If your line-in is really mono, the right
>> channel would not be connected to anything. Are you sure it's not the
>> software you're using that's mixing the two channels together ?
>>
>> Also check your audio recording volume control settings (assuming this
>> is on Windoze) - maybe you're recording the "Mono Mix" instead of
>> "Line In" ?
>>
>>      ~Iain
>> _______________________________________________
>> Elecraft mailing list
>> Post to: Elecraft at mailman.qth.net
>> You must be a subscriber to post to the list.
>> Subscriber Info (Addr. Change, sub, unsub etc.):
>>  http://mailman.qth.net/mailman/listinfo/elecraft   
>> Help: http://mailman.qth.net/subscribers.htm
>> Elecraft web page: http://www.elecraft.com
>>   
>