[Elecraft] Need Help with XG1

[David Wilburn]

It appears I was thinking of another device.  I would first suspect Q1.

Dave Wilburn
NM4M

David Wilburn wrote:
> I don't have mine in front of me, but it is the SMA device that is on 
> there that you need to replace.  It gets blown out.  I'll grab the 
> docs real quick and follow-up.
> 
> Dave Wilburn
> NM4M
> 
> Pete Smith wrote:
>> I have an XG-1 Receiver Test Oscillator which I must have accidentally 
>> zapped with RF somehow (I don't know when) because the output resistors 
>> R6-8 were fried.  I replaced them, as well as R4 and R5, C4 and the 
>> transistor.  The slide switch in the output tests ok.
>>
>> When I turn the XG-1 on, I can very faintly hear its signal, so it appears 
>> that the oscillator is working, but the output level is nowhere near what 
>> it should be. Voltage at the top of C3 is 1.23 volts.  Anyone have any 
>> ideas where else I could look?  Elecraft tech support was helpful but 
>> ultimately gave up.
>>
>> 73, Pete N4ZR
>> the World Contest Station Database is back, and updated daily
>> www.conteststations.com
>>
>>
>> _______________________________________________
>> Elecraft mailing list
>> Post to: Elecraft at mailman.qth.net
>> You must be a subscriber to post to the list.
>> Subscriber Info (Addr. Change, sub, unsub etc.):
>>  http://mailman.qth.net/mailman/listinfo/elecraft    
>>
>> Help: http://mailman.qth.net/subscribers.htm
>> Elecraft web page: http://www.elecraft.com
>>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft    
> 
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>