[Elecraft] Pumping with K3

[Gary Smith]

Hi,

Yes, I usually run with the RF gain down to keep the major qrn down 
on 160 & 80. For the other bands I leave it fully clockwise.

The changes I've made (thanks to the suggestions here) seem to be 
helping somewhat. That's a plus so I'll experiment some more.

I really appreciate the help.

Gary
KA1J

> Gary, have you tried backing off the RF gain?  For me, I try to use the 
> minimum gain I need at the time, and that seems to help (might only be 
> my perception).  Of course, it does nothing if the other guy is too 
> wide, clicking and splattering, etc.
> 
> 73 de Dave, W5SV
> 
> Gary Smith wrote:
> > I'm working the 160 contest and am wondering if there's some hint to 
> > help me overcome pumping from nearby stations. I am using the 8 pole 
> > 2.8K, 1K & 250Hz filters on CW. I'm mostly tuned down to 50Hz as 
> > that's what I need to do to find the DX that's being covered by the 
> > local stations calling CQ.
> >
> > I have tried using AGC F & S with no noted difference. Need the ALC 
> > because of the differing signal strengths.
> >
> > Will check back & thanks
> >
> > Gary
> >   
>