[Elecraft] KAT2 J8 tolerance?

[Don Wilhelm]

Phil,

Yes, it is a tight fit with those many pins, but it will go on, and it 
will come off too.  Make certain all the pins are started before 
applying pressure and apply pressure from both ends of the board.
To remove it, 'wiggle' the ends of the boards alternately so it is 
removed straight.
It requires less force after 2 or 3 times.

73,
Don W3FPR

Phillip Heller wrote:
> Just finished the KAT2 for K2 #6662.
>
> Unfortunately, J8 is just too tight on CTRL P4.  I *might* be able to  
> force it on, but it would never come off.
>
> Anyone run into this?
>
> --phil
>   
>