[Elecraft] New K3

[Bruce McLaughlin]

There is some interaction between the mic gain and vox settings.  You should
be sure you have the mic gain properly set (not too low).  Then with the vox
gain brought up on the menu, slowly advance the gain until the vox reliably
triggers.  Of course, be sure you have enabled the bias.  If you haven't,
neither the vox nor the mike will work, assuming you have the Pro set with
the IC element.

Of course voice volume varies, but for what it is worth, I get very reliable
vox triggering with the vox gain at about 9 or so.

Bruce-W8FU

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Bob Cunnings
Sent: Wednesday, January 21, 2009 9:33 AM
To: elecraft
Subject: Re: [Elecraft] New K3

What VOX gain settings have you tried?

Bob NW8L

On Wed, Jan 21, 2009 at 7:29 AM, Mike, W9QS <w9qs at yahoo.com> wrote:
> I have a new K3/10 Serial Number 2547 and I love it.  First contacts were
during the Fox hunt last night.  I only have one problem.  I ordered the
Heil proset and for some reason I can't get the SSB VOX to function.  I must
be missing something.  Any ideas?
>
> 73,72
>
> Mike, W9QS
> EX: KN6TBP (1956), K1DGQ, DL4KM, K5LJN, W9FRR, W9KVF
>
> K2, OHR500, Norcal 20, SP1
>
> Fists #12327, FP #268, OOTC #4423, QRPARCI #9521
>
>
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>
_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft    

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com