[Elecraft] KRX3: configuration for second antenna routing

[Ian White GM3SEK]

Don Wilhelm wrote:
>
>To connect the subRX auxiliary input to the non-transmit KAT3 antenna, 
>the TMP cable from the KAT3 to the subRX antenna input must be in place 
>(instead of the TMP cable from the BNC).
>
>Factory built K3s with the subRX installed have the BNC cable installed 
>and a separate TMP cable is shipped with the K3 to allow the user to 
>change to the non-transmit KAT3 antenna.
>
>All of this is explained on pages 24 and 25 of the KRX3 installation 
>manual.  The first paragraph on page 25 says it all - "only one of 
>these options can be installed at one time".
>

On the other hand, it *is* useful to have both patch cables ready 
installed, so that either one can be plugged into the KRX3. The end of 
the unused cable can be sleeved and then tucked neatly out of harm's 
way.


-- 

73 from Ian GM3SEK
http://www.ifwtech.co.uk/g3sek