[Elecraft] Microkeyer

[Joe Subich, W4TV]

> The female mini-plug marked "SUB RX" is for a 1/8" stereo 
> cable that goes into the back of a microHAM MK2R or MK2R+ for 
> subreceiver audio in. 

It's also useful with microKEYER II which is dual channel. 

> I don' t know the answer to the Inhibit question, 

The female RCA was added to the ACC plug in the most recent 
revision of the cables so those who use Inhibit from an 
amplifier (Alpha or Acom "Key Out", etc), microHAM Station 
Master, inhibit from M2R/MK2R+, or an external sequencer do 
not need to modify the ACC plug to add and extra cable. 

If one us using an original microKEYER, a K3 without 
subreceiver, or not using any external hardware that 
might need to control the K3 inhibit line, both of the 
pigtails can be ignored. 

73, 

   ... Joe, W4TV 
 



> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net 
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Dick 
> Dievendorff
> Sent: Monday, January 19, 2009 12:30 PM
> To: 'Jay Rodaman'; elecraft at mailman.qth.net
> Subject: Re: [Elecraft] Microkeyer
> 
> 
> The female mini-plug marked "SUB RX" is for a 1/8" stereo 
> cable that goes into the back of a microHAM MK2R or MK2R+ for 
> subreceiver audio in.  The 37-pin cable was full, so that 
> line was made separate.  I don' t know the answer to the 
> Inhibit question, but I would recommend you ask on the microHAM forum.
>  
> Dick, K6KR
>  
>  
> From: elecraft-bounces at mailman.qth.net 
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Jay Rodaman
> Sent: Monday, January 19, 2009 8:09 AM
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] Microkeyer
>  
> Just setting up my new K3 with sub receiver.
> I have the Original Microkeyer and got the matching cable set 
> for the K3 Question is: There are two connectors that I do 
> not know where to connect 1.RCA female marked "INHIBIT" 2. 
> Female mini-plug marked "SUB RX" Where do these go? Thanks 
> for any help Jay
>