[Elecraft] K3: NB says "IF N/A"

[Frank R. Oppedijk]

Ron,

Thanks for your speedy reply! This indeed solved my problem. I guess 
I inadvertently must have modified it to not inSt while enabling the 
subreceiver or so.

Thanks!

73,

Frank PA4N


At 22:09 18/01/2009, Ron D'Eau Claire wrote:
>Hello Frank:
>
>Try CONFIG:KNB3. You'll probably see "not inSt" saying it's not enabled.
>Rotate VFO B to say "rF nor", then exit the menu and turn the K3's power off
>then on again to enable it.
>
>Ron AC7AC
>
>-----Original Message-----
>
>Hi,
>
>While participating today in the HA DX contest, I tried to reduce a
>kind of ignition noise. I switched on the noise blanker and noticed
>that I could only adjust the DSP NB; the second line said "IF N/A". I
>am sure this worked some time ago, but as I don't regularly use the
>noise blanker, I can't say at which moment it stopped working...
>
>Has anyone experienced this before? Did I screw up some config
>setting, or is this a hardware issue?
>
>Thanks in advance, 73
>
>Frank PA4N


---
drs. ing. F.R. Oppedijk
Avista ICT Consultancy B.V.
Albert Schweitzerlaan 7
1277 BV  Huizen

tel: 035 - 523 09 83
fax: 035 - 523 09 84