[Elecraft] K3 Modifications Photos

Don Nesbitt drnesbitt at bellsouth.net
Thu Jan 8 21:39:42 EST 2009


I've posted a few photos of the modifications that I made at the same time I
installed the KDVR3.  Modifications include:

 

- External ALC Modification and Optional Pull-Up resistors for Band Outputs

 

- AF Stage Upgrade - Line Out and Speaker Amplifier (the "easy" way & using
the SMD resistors)

 

- Front Panel Microphone Circuit Modification - Application Note

 

- Improving the Immunity of the Rear-Panel RS232 and Audio Connectors to RF
- Application Note

 

And, a TOTALLY UNAUTHORIZED implementation of the "K3 Caution when using an
external monaural speaker" post to the reflector by Wayne on December 20,
2008.  The email outlines a circuit modification which is meant to protect
the audio output chip from spikes by putting a 470 ohm resistor to ground
from each of the speaker outputs and suggests that a convenient place to do
this would be on the audio daughter board at the single-row, right angle
male connector.  You can see how I did this in the photo.  I'd advise you to
WAIT until Lyle creates an actual application note and posts it!  DO THIS AT
YOUR OWN RISK!  For all I know, I've got it wrong - but - didn't see any
smoke and it seems to work - for me!  YMMV!

 

You can see my simple photos at:  http://www.flickr.com/photos/n4hh

 

No registration is required.  Use the "Slideshow" for larger images.

 

While I really didn't notice a "need" to do these modifications, it was
convenient to do them along with the installation of the DVR.  None of these
modifications (including installing the KDVR3) required the removal of the
Sub-Rx and other than being a bit tedious, were simple and straight forward
including using a toothpick to hold down the SMDs!  Have fun!  '73 es gud
dxing - Don N4HH  K3/100 #83

 

No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.176 / Virus Database: 270.10.5/1883 - Release Date: 1/8/2009
6:05 PM


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.qth.net/pipermail/elecraft/attachments/20090108/a62a93d5/attachment.html 


More information about the Elecraft mailing list