[Elecraft] cw to psk

[drewko]

I haven't tried the data modes; I am mainly a CW guy. 

But what I would like to be able to do is this: when I'm on CW and a
RTTY station fires up on top of me, I'd like to just hit a switch and
send a preprogrammed RTTY QRL message to the RTTY op. Is this
possible? If there was a dedicated one-button function for this in the
firmware, I think it would be great.

73,
Drew
AF2Z




On Tue, 06 Jan 2009 19:59:31 -0800 (PST), Don...w2xb wrote:

>
>Hello all,
>Just want to thank all that responded to my cry for help.I was trying to get
>the cw to psk to work with my key. Well after many hours trying to get it to
>work,with no luck. I finally sent an e-mail to K3support. Gary responded
>very fast.(like always). We checked out everything and I still didn't think
>I was putting out a psk signal. Finally Gray relayed to problem to Wayne,
>who suggested that I do a factory reboot. First I backed up my memories and
>setting with the "Utility". Can't say enough for that great piece of
>software. Then did the reboot. Tried cw to psk with the key again. Still
>sounded the same. So got an e-mail from Wayne and he suggested that I call
>him to see if we could work it out.Making the call and talking to him, he
>keyed his rig in the cw to psk mode and I listened on the phone.Whaaaa!
> The same sound I was getting out of my rig.HANG MY HEAD IN EMBARASSMENT!!
>There was nothing wrong with the rig or setup. I was just used to hearing
>the tones from the soundcard setup. Boy talk about a senior moment......
> The best thing I did that saved me lots of work was backing up my rigs
>settings on the "utility program" Just did a restore and the rig was back to
>where it was before the hard boot.
>  I have worked several stations using the cw-psk with the key and really
>think its neat. 
> Just thought that I would pass this info on to all. And really like to
>thank "Gary and Wayne for the great support. Don't think you can get any
>better support than "ELECRAFT"
>
>Many thanks
>
>Don...w2xb