[Elecraft] K2 rf board resistance check

[John]

Hello.
I've checked all components on the 8B rail and can find no problems there.  
All solid state devices are installed correctly.
I cleaned off flux and found no hidden solder splashes.
The resistance at pin 8 of U6 still reads about 50 ohms instead of the >100 expected in the manual.
I'm stuck for now.
73.
John.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.qth.net/pipermail/elecraft/attachments/20090106/8ac5c9a8/attachment.html