[Elecraft] VFO CTS changing

[ab2tc]

Hi,

I am on the latest firmware, 2.76. Recently I have played around more with
AM listening on the SWL bands and generally found it enjoyable (audio
clearly there from 100-4200Hz when set to do so!!). However there is
definitely an anomaly with the VFO tuning rate (steps per revolution "VFO
CTS"). For normal SSB ham band use I have this set at 400.  If I go to AM
mode and press coarse to set the step to 1kHz, this gets changed to 100.
This may be intentional; at this big tuning step, 100 steps per revolution
is OK.  But if I go back to SSB and 10Hz tuning step, the "CTS" is still at
100. I believe this has been around for a while since I have many times
inexplicably found my "CTS" being set to 100. I can't recall seeing that the
"CTS" should be mode dependent in any way and I think it's best if left
totally mode independent.

Knut - AB2TC

-----
AB2TC - Knut
-- 
View this message in context: http://n2.nabble.com/VFO-CTS-changing-tp2111105p2111105.html
Sent from the Elecraft mailing list archive at Nabble.com.