[Elecraft] K3 - PSK program?

[Leigh L. Klotz, Jr WA5ZNU]

In addition to the recommendation to use Simon's DM780, you might also 
consider fldigi, which runs on Windows XP, Vista, MacOS, Linux, and a 
few other operating systems.  I'm one of the authors, albeit way down 
the list.  (The modem set in DM780 originally came from fldigi, but they 
have quite different UI and feature sets above that.)
Leigh/WA5ZNU
>
> Finally getting the software and hardware setup. Great to have this 
> time off during the holidays. Got the following working well at the 
> same time with the K3 and two monitors:
>
> LP-PAN, LP-Bridge, PWRSDR, Skimmer, N1MM and also MMTTY(FSK) & AXETTY 
> (for Dxbase) working fine. Still working on Dxbase to see if it can 
> interface with LP-Bridge.
>
> The next thing I want to tackle is PSK31. Tried WINPSK but had 
> problems getting enough audio signal (do not have this problem with 
> MMTTY).
>
> So, any recommendations for a PSK program that interfaces well with 
> the K3?  I am not using any of the interface boxes as so far things 
> seem to work fine with a direct connection between the K3 and my PC.
>
> Tnx for any feedback.
> N2TK, Tony
> K3 #311
> K3 #1435
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft    
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com