[Elecraft] K3: Still unable to set power correctly in, DATA A(sigh)

[G4LNA]

Joe Subich, W4TV-4 wrote:
> 
> 
> 
>  Perhaps 
> the power metering should be derived from a DSP based spectrum 
> analyzer? 
> 
> Accept the fact that the power level control is relative.  If  
> Wayne and Lyle can improve on it that's great.  However, trying 
> to hold .1 dB or even 1 dB accuracy from 1 mW to 120 W, 1.8 MHz 
> to 54 MHz with arbitrary modulation sources in a reasonably 
> priced amateur transceiver is a fool's errand. 
> 
> [SNIP]
> 
> 

I never measure power using the power meter on the K3, I always use an
oscilloscope as that will read the true power and not rely on  that silly
little meter on the rig which is never correct and I've never had a problem
like that.

-- 
View this message in context: http://n2.nabble.com/K3%3A-Still-unable-to-set-power-correctly-in%2C-DATA-A%28sigh%29-tp2106764p2108569.html
Sent from the Elecraft mailing list archive at Nabble.com.