[Elecraft] K3 UTILITY RTTY

[Dick Dievendorff]

Try setting Auto Info (AI) off. From the command tester window, type "AI0;"
(don't forget the semicolon)    You may have AI1 for something like a
SteppIR controller or perhaps another logging program left the rig in AI2 or
AI1 mode.  

 

In "auto info" mode, the K3 sends data to the connected program whenever you
change frequency.  

 

The insertion of the commands is because somehow you've managed to trigger
my "diagnostic" spew. Try pressing CTRL-W to see if that stops it.

 

Dick, K6KR

 

 

From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Jack Regan
Sent: Saturday, January 03, 2009 2:10 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] K3 UTILITY RTTY

 

I have been working RTTY for the first time using the K3 Utility and boy is
it ever easy!  Almost too easy! Takes the challenge out!

 

Anyway, my question is....

 

In RTTY mode, FSK D I am seeing K3 commands in the TEXT RECEIVED window when
I send. 

For example: ;AE6GKY0;C AEKY0;6GCKY0

 

I also see commands when I tune showing VFO A and B's frequency.

 

Is this normal? It is kind of distracting!

 

Jack AE6GC

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.qth.net/pipermail/elecraft/attachments/20090103/bd2e5abd/attachment.htm