[Elecraft] cw to psk

[Don Wilhelm]

Don,

I just tried it and it works fine for me - whether the Test Decode 
(small "T") is on or off, it works FB.
Any chance that you are first tapping the 'XMIT' button?  If so, don't 
do that - just hit the paddle and go.
You should see the message you entered with the paddles displayed in the 
VFO B area.

73,
Don W3FPR

W2XB wrote:
> Hello Group,
> Need a little help with the cw to Psk on the K3. I can transmit with the
> paddles but only get a steady tone. If I hit "M2" I send cq and can hear the
> psk tones. I must be looking at something I didn't set. Listen on another
> rig and only a stead tone. have it in "data mode" selected "Psk" and I see
> the small "T" below the data icon.Also have the key plug in the "paddle"
> jack in the rear.
>  Any ideas?
>
> Don..w2xb
>
> P.S. no problem sending psk or data with the soundcard and MixW.
>   
>