[Elecraft] KRX3 and KDVR - Installation Sequence

[Jim Miller]

Installing the KDVR3 is a nothing once the front panel is out and apart, tiny board, one plug, one screw.  Unless something is so seriously wrong with your KDVR3 that is killing a voltage or a signal (really unlikely), just put it in and then only turn on one at a time in the menu system until you are satisfied with it.

73, Jim
  ----- Original Message ----- 
  From: Dick Dievendorff 
  To: 'G4MKP' ; elecraft at mailman.qth.net 
  Sent: Friday, January 02, 2009 1:44 PM
  Subject: RE: [Elecraft] KRX3 and KDVR - Installation Sequence


  Both option installations require that you remove and reinstall the front panel.  

   

  If it were me, I'd install them at the same time and only remove and reinstall the front panel once.

   

  I'd go through the two Option Assembly manuals and see that the steps to remove and reinstall the front panel are quite similar.

   

  If you're at all uncomfortable with this, or want to verify that one is working before starting the other, then I'd do the KRX3 second receiver first.

   

  Dick

   

   

  From: elecraft-bounces at mailman.qth.net [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of G4MKP
  Sent: Friday, January 02, 2009 11:30 AM
  To: elecraft at mailman.qth.net
  Subject: [Elecraft] KRX3 and KDVR - Installation Sequence

   

  My sub-receiver + filters and Voice recorder have been posted and are due any day. Grateful for any recommendations of the sequence for installation of these two.

   

  One other question; Is it/will it be possible to activate the DVR via RS 232? I'm thinking N1MM control and also a friend's logging application currently under development?

   

  Cheers,

   

  Terry

  G4MKP

   

   

   



------------------------------------------------------------------------------


  _______________________________________________
  Elecraft mailing list
  Post to: Elecraft at mailman.qth.net
  You must be a subscriber to post to the list.
  Subscriber Info (Addr. Change, sub, unsub etc.):
   http://mailman.qth.net/mailman/listinfo/elecraft    

  Help: http://mailman.qth.net/subscribers.htm
  Elecraft web page: http://www.elecraft.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.qth.net/pipermail/elecraft/attachments/20090102/dedd0907/attachment.htm