[Elecraft] KRX3 and KDVR - Installation Sequence

[Jim Miller]

Yes, read the installation of the DVR and then while installing the KRX3 and you have the front end apart, put it in.  The filter can be installed anytime (first) up until you do the "final" step of placing the KRX3 in position and screwing it down.  Just did exactly what you ask.  Use a flashlight, even a tiny one, for pin alignment and inspection.  But don't do the front panel reinstallation late at night, I couldn't hit the pins right.  It worked fine when installed it in the morning LOL.

73, de Jim KG0KP
  ----- Original Message ----- 
  From: G4MKP 
  To: elecraft at mailman.qth.net 
  Sent: Friday, January 02, 2009 1:30 PM
  Subject: [Elecraft] KRX3 and KDVR - Installation Sequence


  My sub-receiver + filters and Voice recorder have been posted and are due any day. Grateful for any recommendations of the sequence for installation of these two.

   

  One other question; Is it/will it be possible to activate the DVR via RS 232? I'm thinking N1MM control and also a friend's logging application currently under development?

   

  Cheers,

   

  Terry

  G4MKP

   

   

   



------------------------------------------------------------------------------


  _______________________________________________
  Elecraft mailing list
  Post to: Elecraft at mailman.qth.net
  You must be a subscriber to post to the list.
  Subscriber Info (Addr. Change, sub, unsub etc.):
   http://mailman.qth.net/mailman/listinfo/elecraft    

  Help: http://mailman.qth.net/subscribers.htm
  Elecraft web page: http://www.elecraft.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.qth.net/pipermail/elecraft/attachments/20090102/076b08f2/attachment.htm